Unboxing Malifaux - Sparks

'A little knowledge is a dangerous thing...'

The Sparks box contains enough parts for one miniature...namely Sparks. It also contains a stat card for him though there are no upgrade cards.

Sparks - Sprue

The box has one sprue in it as well as the aforementioned card. Here's pictures of both sides of it...

Sparks - Stat Card

Wyrd Games didn't like my publishing pictures of both sides of the stat cards so you'll have to make do with this...

Should there be any assembly issues with the model then they will be listed in the appropriate section and you can view larger versions of the smaller pictures or instruction pictures by clicking on them.

Sparks - Instructions

There are yet to be any instructions for this one but as soon as they appear I'll insert them here.

Some General Notes on Assembly.

Many of these models contain quite small parts so depending on how dexterous you are you might consider getting yourself some tweezers. Dry-fitting is also always a good idea in case a part needs a tiny bit of extra filing or filling as some of the fits are quite tight. Where the parts on the sprue are quite thin (chains, weapon shafts, cables and the like) then it might be better to remove parts with a sharp scalpel rather than cutters.

Sparks - Assembled

This model consists of only six parts and despite being a Gremlin you'll be happy to know that it doesn't have separate feet or separate ears and the separate limbs aren't too thin either. There is a strange indentation on the rear of the head that I thought I was missing a part for but once you attach the arm holding the wrench the tool section neatly aligns with this area covering it completely.

The model is based on a 30mm Wyrd Games Bayou Base Insert...

Thoughts and comments are (as usual) most welcome.