Monday, 8 August 2016

Unboxing Malifaux - Scion of the Void

"Need an extra hand...or two?"

The Scion of the Void box contains enough parts for one miniature...namely the Scion of the Void. It also contains a stat card for him though there are no upgrade cards.

Scion of the Void - Sprue
The box has one sprue in it as well as the aforementioned card. Here's pictures of both sides of it...

Scion of the Void - Stat Card
Wyrd Games didn't like my publishing pictures of both sides of the stat cards so you'll have to make do with this...

Should there be any assembly issues with the model then they will be listed in the appropriate section and you can view larger versions of the smaller pictures or instruction pictures by clicking on them.

Scion of the Void - Instructions
There aren't any instructions for this yet but as soon as there are they will appear here.

Some General Notes on Assembly.
Many of these models contain quite small parts so depending on how dexterous you are you might consider getting yourself some tweezers. Dry-fitting is also always a good idea in case a part needs a tiny bit of extra filing or filling as some of the fits are quite tight. Where the parts on the sprue are quite thin (chains, weapon shafts, cables and the like) then it might be better to remove parts with a sharp scalpel rather than cutters.

Scion of the Void - Assembled
Though the model has lots of little spikes and a few bits of thin ribbon that you'll need to be careful of it is only five parts total so as long as you're careful when removing the parts from the sprue you should have no issues.

Thoughts and comments are (as usual) most welcome.

1 comment:

  1. Awesome model, and it's good to see that it's not in too many pieces. Though the Scion of the Void is a she, by the way :)


Related Posts with Thumbnails